Chargers and other accessories
WARNING!
This apparatus is intended for use when supplied with power
from the Standard Travel Charger (ACP-7U), Rapid Travel
Charger (ACP-9U), or Rapid Cigarette Lighter Charger
(LCH-9). Other usage will invalidate any approval given to
this apparatus and may be dangerous.
The following chargers and other accessories are available for
your phone; please see your dealer for details. Also, refer to any
accessory options manual that may have been included in your
sales package for the entire line of Nokia Original Accessories.
Note: When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger
for longer than a week, since overcharging may shorten its
life. If left unused, a fully charged battery will discharge itself
over time.
Battery
Talk Time
Standby Time
Digital
Analog
Digital
Analog
BPS-1 Ultra Slim
Li-Polymer
600 mAh
2 hrs. to
3 hrs.
20 min.
1 to 2
hrs.
40 to
150 hrs.
10 to
17 hrs.
BLS-2N Extended
Li-Ion 900 mAh
3 to
5 hrs.
1 hr.
30 min.
to 3 hrs.
60 to
225 hrs.
16 to
26 hrs.
BMS-2S Extended
NiMH 900 mAh
BMS-2V Extended
NiMH Vibra
900 mAh
BLS-4 Ultra
Extended
Li-Ion 1500 mAh
5 to
8 hrs.
2 hrs.
45 min.
to 5 hrs.
100 to
375 hrs.
26 to
44 hrs.
80
ACP-7U Standard Travel Charger
Use this durable and economical
charger to charge all battery
options. Plug the charger into a wall
outlet and connect the connector to
the bottom of your phone. Check the
charging status on the phone
display.
Calls can be made during charging, but charging will stop
for the duration of the call.
Note: If the battery is completely empty, you cannot use the
phone until it has enough charge to operate.
The Standard Travel Charger is available for different
voltage levels and can also be used with the DCH-9
Compact Desktop Charging Stand.
ACP-9U Rapid Travel Charger
The extremely light, functionally
designed Rapid Travel Charger charges
your phone battery quickly.
Plug the charger into a wall outlet and
connect the connector to the bottom of
your phone. Check the charging status
on the phone display. You can use your
phone while charging.
Operating within a voltage range of 100V-240V AC
(50Hz-60Hz), the Rapid Travel Charger is practically
voltage-independent in normal office and household use.
Like the Standard Travel Charger, the Rapid Travel Charger is
compatible with all battery options. The Rapid Travel
Charger can also be used with the DCH-9 Compact Desktop
Charging Stand.
81
LCH-9 Rapid Cigarette Lighter Charger
The multivoltage Rapid
Cigarette Lighter Charger
allows you to charge your
phone when you travel. The
small charger's functional
design fits well with most car
lighters and interiors.
Charging times are the same as for the Rapid Travel Charger
ACP-9U. Calls can be made during charging.
A green light indicates that the Rapid Cigarette Lighter
Charger is ready to charge. Check the charging status on the
phone display. The input voltage is 12 or 24 V DC, negative
grounding.
The Rapid Cigarette Lighter Charger can be used with all
accessories available for your phone.
Avoid prolonged charging with the Rapid Cigarette Lighter
Charger when the car engine is not running. This may cause
the battery of your car to drain.
Note: In some cars the cigarette lighter plug is not provided
with power when the ignition is switched off. Verify that the
green LED light is lit.
DCH-9 Compact Desktop Charging Stand
Compatible with all
battery options, the
Compact Desktop
Charging Stand can be
used with the Standard
Travel Charger ACP-7U
or the Rapid Travel
Charger ACP-9U. The
Compact Desktop Charging Stand provides mounting for
both the phone and a spare battery. Plug the charger into a
wall outlet and connect the connector to the back of the
Compact Desktop Charging Stand. Place your phone and/or
a spare battery in the stand to begin battery charging.
82
When the phone is charging, no lights are displayed on the
stand; check the charging status of the phone battery on
the phone display.
Note: If you have attached an optional analog module, be
sure to remove it and replace the battery before placing the
phone in the charging stand. Although the phone will fit in
the stand with the analog module attached, charging will
not take place.
Charging moves to the rear slot once the front battery is
100% charged.
When the spare battery is charging, check the status indicator
on the left side of the charging stand. A red light indicates
that the battery is charging; a green light indicates that the
battery is charged to at least 80% of its capacity.
The phone has the built-in intelligence to maintain the
battery, so there is no need for a discharge feature on the
stand.
DCH-9 Rear Slot Charging Times
Battery option
Using ACP-7U
Using ACP-9U
Front
slot
empty
Front
slot
full
Front
slot
empty
Front
slot
full
BPS-1 Ultra Slim
Li-Polymer 600 mAh
4 hrs.
30 min.
6 hrs.
30 min.
3 hrs.
4 hrs.
30 min.
BLS-2N Extended
Li-Ion 900 mAh
6 hrs.
30 min.
8 hrs.
30 min.
4 hrs.
30 min.
5 hrs.
30 min.
BMS-2S Extended
NiMH 900 mAh
BMS-2V Extended
NiMH Vibra 900 mAh
BLS-4 Ultra Extended
Li-Ion 1500 mAh
12
hrs.
15 hrs.
45 min.
8
hrs.
10 hrs.
30 min.
83